FreightUtils MCP Server

FreightUtils MCP Server

The neutral freight reference layer for AI agents.

FreightUtils is the neutral freight reference layer for AI agents — source-backed dangerous-goods, customs, location and freight-calculation data an agent can call and cite, from primary sources (ADR 2025 / UNECE, HS 2022 / WCO, IATA-regulated airline prefixes). Neutral by design: no freight to sell and no carrier to push — a lookup returns what the named source says, with the citation attached so an agent can inspect it rather than take our word for it, regardless of who carries the load.

This Model Context Protocol server gives AI agents access to 25 freight calculation and reference tools, covering road, air, and sea freight. Built by a UK ADR-certified freight transport planner.

Every response cites its source — a _source block with the authority, edition, licence where held, and a verification status an agent can read — and the tools are deterministic, not generated answers. Reference only: never filing, booking, or legal advice, and results state when human review is required (validate is structural check-digit validation only; a clean ics2_check is not ENS acceptance; emissions figures are estimates, not audited reports).

Since 2.11.0, every tool also declares a typed outputSchema and returns structuredContent — the FreightUtils v1 response envelope: the answer under result, plus confidence, normalized_input, warnings, _source and a ready-to-use citation. The legacy flat JSON text channel is unchanged (byte-identical), so existing text-parsing consumers are unaffected.

Website: https://www.freightutils.com API Docs: https://www.freightutils.com/api-docs

---

Tools (25)

Calculators

Tool	Description
ldm_calculator	Loading metres for European and US road trailers
cbm_calculator	Cubic metres for sea freight
chargeable_weight_calculator	Air freight chargeable weight (volumetric vs actual)
pallet_fitting_calculator	Box-on-pallet optimisation with rotation
container_lookup	ISO container specs (10 types) and loading calculation
unit_converter	Weight, volume, length, and freight-specific conversions
consignment_calculator	Multi-item CBM, LDM, volumetric & mode-specific chargeable weight (sea/air/road) + advisory flags
emissions_calculator	Freight CO2e via the ISO 14083 / GLEC distance-based method — open DEFRA/EPA/ADEME factors (WTW + TTW); use actual gross mass (not chargeable/volumetric); result carries empty_running + representativeness (sea/air = low) + a summary

Dangerous Goods (ADR)

Tool	Description
adr_lookup	2,939 UNECE ADR 2025 entries
adr_exemption_calculator	ADR 1.1.3.6 small load exemption check
adr_lq_eq_check	Limited and Excepted Quantity eligibility

Customs & Tariff

Tool	Description
hs_code_lookup	6,940 Harmonized System tariff codes (HS 2022)
uk_duty_calculator	UK import duty and VAT (live GOV.UK Trade Tariff data)
incoterms_lookup	Incoterms 2020 — all 11 rules with risk/cost transfer points
ics2_check	Flag EU ICS2 unacceptable goods-description terms (stop-words) before filing an ENS — reference only

Reference Data

Tool	Description
resolve_reference	Resolve any freight identifier ("176", "UN1845", "NLRTM", "FOB") to typed, ranked, cited candidates when its type is unknown
airline_lookup	6,357 airlines with IATA/ICAO codes and AWB prefixes
unlocode_lookup	116,232+ UN/LOCODE transport locations
airport_lookup	85,555 airports by IATA/ICAO code, name or city (OurAirports)
nearest_airport	Nearest airports to a latitude/longitude, by great-circle distance
uld_lookup	16 air cargo ULD types (LD3, PMC, etc.)
vehicle_lookup	17 road freight vehicles and trailers

Validation

Tool	Description
validate	Parse any text (a booking line, an email) to find & validate every container (ISO 6346), AWB (modulus-7) and IMO number in it — or validate a single identifier by type

Composite

Tool	Description
shipment_summary	Chains CBM + weight + LDM + ADR + duty in one call

Plans

Tool	Description
get_subscribe_link	The pricing page URL with the Pro plan's limit and price (50,000/month at £19/mo)

---

Installation

Claude (claude.ai, desktop and mobile apps, Cowork)

Add FreightUtils from Claude's connector directory: https://claude.ai/directory/connectors/freightutils. Or add it as a custom connector — Customize → Connectors → Add custom connector — with the URL https://www.freightutils.com/api/mcp. No API key, no sign-in. Setup, limits and privacy: freightutils.com/mcp#use-in-claude.

Claude Desktop / Claude Code (stdio)

Add to your MCP config (claude_desktop_config.json or .claude/settings.json):

{
  "mcpServers": {
    "freightutils": {
      "command": "npx",
      "args": ["freightutils-mcp"]
    }
  }
}

Remote HTTP / SSE

If your MCP client supports remote servers, use the canonical URL:

https://www.freightutils.com/api/mcp

The older URL https://www.freightutils.com/api/mcp/mcp still works for backwards compatibility with existing clients.

No API key required to get started — anonymous calls work out of the box (see Rate Limits below).

Authenticating with a Pro key

Anonymous usage caps at 25 requests/day per IP. If you have a free or Pro API key, set FREIGHTUTILS_API_KEY in the environment that runs the MCP server. The package reads it from process.env and attaches Authorization: Bearer <key> to every outbound /api/* call — same key the remote https://www.freightutils.com/api/mcp transport already honors.

stdio config example with the env var wired through:

{
  "mcpServers": {
    "freightutils": {
      "command": "npx",
      "args": ["freightutils-mcp"],
      "env": {
        "FREIGHTUTILS_API_KEY": "fu_pk_xxx"
      }
    }
  }
}

Get a key at freightutils.com/api-docs (free, 100/day) or freightutils.com/pricing (Pro, 50,000/month). Backwards compatible — unset env var preserves the existing anonymous behaviour.

---

Verify your setup

After adding FreightUtils to your MCP client config, fully quit and relaunch the client (Claude Desktop, Cursor, Cline). MCP servers are only loaded at client startup; editing the config in a running session does nothing until restart.

Then run the install diagnostic from a terminal:

npx freightutils-mcp ping

You should see three ticks and All checks passed:

FreightUtils MCP Diagnostic
───────────────────────────
package: freightutils-mcp@<installed version>
health:  https://www.freightutils.com/api/mcp/health

[1/3] Backend health (https://www.freightutils.com/api/mcp/health)
      ✓ status=ok mcp_version=<current> tools_registered=<current> (143ms)

[2/3] MCP handshake (in-process via InMemoryTransport)
      ✓ server freightutils-mcp@<installed version> initialized; tools/list returned <n> tools

[3/3] End-to-end tool call (cbm_calculator l=120 w=80 h=100)
      ✓ cbm_calculator → total=0.96 m³ (expected 0.96) (218ms)

All checks passed. Your FreightUtils MCP install is working.

If any check shows ✗, see Troubleshooting below. Exit code is 0 on all-pass and 1 on any failure, so the command works in CI / health-check scripts too.

---

Troubleshooting

Symptom	Likely cause	Fix
Tools not appearing in the MCP client after editing the config	Client wasn't fully restarted	Quit and relaunch (Cmd+Q on macOS / right-click → Quit on Windows tray). Closing the window is not enough.
npx freightutils-mcp ping check 1 fails with a network error	DNS, proxy, or the website is unreachable from your network	Check the status page at https://www.freightutils.com/status. If you're behind a corporate proxy, set HTTPS_PROXY. Override the host for ping with FREIGHTUTILS_API_URL=<base-url>.
npx freightutils-mcp ping check 2 fails	Broken local install (npx cache or stale Node version)	Re-install: rm -rf ~/.npm/_npx && npm install -g freightutils-mcp and rerun. Requires Node 18 or newer.
Tool calls return HTTP 429 / "rate_limited"	Anonymous IP cap of 25 requests/day exceeded	If you have a FreightUtils Pro API key, set FREIGHTUTILS_API_KEY in your environment before invoking the MCP. The package passes it through automatically on every outbound call. See https://www.freightutils.com/pricing if you need a key.
"Server failed to start" / spawn error in client logs	npx not on PATH, or Node older than 18	Install Node 18+. On macOS, an absolute path in the config ("command": "/opt/homebrew/bin/npx") avoids PATH issues for GUI-launched clients.
Specific tool returns isError: true	Bad input shape, or an unknown lookup key (UN number / HS code / AWB prefix not in the dataset)	The tool's error body names the offending field. Verify against the schema at https://www.freightutils.com/api-docs or call the corresponding playground endpoint to confirm the input shape.

The full diagnostic flow lives at the /api-docs#mcp-setup section on the website. The live backend status is callable from inside any MCP client at GET /api/mcp/health — useful when you don't have shell access during a conversation.

---

Rate Limits

All tools call the free FreightUtils API:

• Anonymous: 25 requests/day per IP
• Free API key: 100 requests/day (register at https://www.freightutils.com)
• Pro: 50,000 requests/month at £19/month

---

Example Prompts

Once connected, your AI agent can:

• "Calculate CBM for a box 120cm × 80cm × 100cm, 24 pieces"
• "Look up UN 1203 in the ADR database"
• "Check if 200L of petrol qualifies for ADR 1.1.3.6 exemption"
• "Find the HS code for lithium batteries"
• "What does FOB mean in shipping?"
• "How many boxes of 40×30×25cm fit on a euro pallet?"
• "Calculate loading metres for 26 euro pallets on an artic trailer"
• "What's the UK import duty on laptops from China?"

---

Data Sources

• ADR 2025 — UNECE, ECE/TRANS/352, applicable 1 Jan 2025; given legal effect by EU Directive 2008/68/EC (consolidated). Factual compilation, best-effort — not legal advice, not a regulatory authority.
• HS 2022 — UN Comtrade HS 2022 (Public Domain Dedication and Licence); the WCO Harmonized System nomenclature is the authority.
• Airlines — the IATA / ICAO code registries. Authority only: this dataset carries no per-record provenance, and no licence or "open data" claim is made for it.
• UN/LOCODE 2025-1 — UNECE official release artifact, coordinates strict-validated.
• UK duty — the live GOV.UK Trade Tariff API, pulled per request, so there is no local copy that can drift.
• Containers / ULD / vehicles — ISO, IATA and industry-standard specifications.
• Emissions factors — open DEFRA / EPA / ADEME factors (currently DEFRA 2026 + EPA 2025
  • ADEME Base Carbone v23.11), combined by the ISO 14083 / GLEC distance-based method. Estimates, not audited reports.

Public provenance wording is maintained in the FreightUtils repository's docs/DATA_PROVENANCE.md and copied here, not written from memory — so a source that is re-attributed there cannot keep being cited here.

---

Changelog

Release notes: CHANGELOG.md in this repo and GitHub Releases.

A README that carries its own copy of the changelog is why three directories showed 2.4.0 as the latest release for three months after 2.4.0 had been superseded. One source now.

---

Other ways to use FreightUtils

FreightUtils ships across multiple distribution surfaces. Pick the one that fits how you work:

• Website — interactive tools at freightutils.com
• REST API — 24 endpoints, free tier (100/day) and Pro tier (50K/month, £19/mo). API docs
• MCP server — for LLM agents and AI tooling. npm: freightutils-mcp · MCP Registry
• n8n custom node — for workflow automation. npm: n8n-nodes-freightutils
• Custom GPT — the FreightUtils GPT on the OpenAI GPT Store, backed by the same OpenAPI spec.

Same data, same compliance reference set (ADR 2025, HS 2022, IATA-regulated airline prefixes), every surface kept in sync.

---

License

MIT — see LICENSE.

Built by Marius Cristoiu, ADR-certified freight transport planner.