Azure App Onboard Prereq

Azure App Onboard Prereq — Repository Evaluation

Evaluate a user's repository for build health, app completeness, and Azure deployment feasibility — before infrastructure planning. Produces per-component verdicts (PASS/WARN/FAIL) consumed by downstream phases.

Orchestrator relationship: Called by azure-app-onboard at Step 3, or standalone for code readiness checks. When called by orchestrator, return control to azure-app-onboard after writing artifacts — do NOT invoke downstream phases directly.

Phase 1 of 4 in AppOnboard pipeline. Session: .copilot-azure/sessions/{session-id}/. Reads context.json. Writes components[], repo{}, detectedInfra[]. Produces prereq-output.json. Schema: prereq-schemas.ts — PrereqOutput, BuildRequirements. Direct entry supported.

When NOT to Use

Signal	Redirect
Validate infrastructure (Bicep/TF/azure.yaml)	azure-validate
Generate IaC	azure-prepare
End-to-end idea-to-production	azure-app-onboard
Run azd up or deploy	azure-deploy

Rules

⛔ ABSOLUTE PROHIBITION — npm install, npm test, npx jest, pytest, and ALL install/build/test commands are NEVER allowed. Under NO circumstances may you run npm install, npm test, npx jest, pip install, pytest, dotnet build, dotnet restore, dotnet test, go mod download, cargo build, or ANY package-manager install, build, or test command during the prereq phase. Do NOT run test suites to verify code — check for test config files statically instead. The prereq phase is read-only evaluation + static-only verification. ONLY exception — two sanctioned contexts, both consent-gated: (a) code the agent modified during migration/remediation (see remediation-protocol.md step 6), or (b) code the agent wrote from scratch on the zero-code path (see zero-code-path.md). In either case, install/build/test runs ONLY via the user-confirmed build-validation gate (build-check.md Step 3), after the user answers that specific per-command consent prompt. General prior consent never counts.

1. ⛔ Full pipeline (Steps 1–8), no exceptions. All prompts → Step 1 directly. Answer specific questions AS PART OF findings (Step 5), not before.
2. ⛔ No sub-agents for evaluation. 3-axis evaluation is inline. Exception: zero-code-path scaffolding (Step 2).
3. Code/destructive modifications require ask_user. Max 3 questions before results. Direct entry: don't repeat orchestrator's intent questions.

MCP Tools

Tool	Purpose
mcp_azure_mcp_get_azure_bestpractices	Validate detected stack patterns against Azure best practices
mcp_azure_mcp_extension_cli_install	Check/install required CLI tools (az, azd, func)

Workflow

Step 1: Session Check

Orchestrator entry: Session exists — read context.json, proceed to Step 2.

Direct entry: Check .copilot-azure/sessions/active-session.json:

• Exists → ⛔ read session-protocol.md for resume/fresh gate. Do NOT proceed until user answers.
• Missing → create session: generate UUID, New-Item -ItemType Directory -Path ".copilot-azure/sessions/{uuid}" -Force, write context.json + active-session.json via create tool.

Then: az account show → merge {id, name, tenantId} into context.json.azure. ⛔ Session MUST exist on disk before any scanning.

Step 2: Scan Workspace

Scan for project files. Detect components, repo{}, detectedInfra[], detectedServices[]. Classify Terraform providers. Check CLI availability. Stack detection conflicts: user explicit statement wins (write to context.json, mark scan as override); scan-only → confirm with user; multiple stacks → show all and ask (see component-mapping.md); no code → zero-code-path.md.

If no project files, no Dockerfile, AND no index.html → ⛔ read zero-code-path.md.

⛔ Cloud SDK early gate. Grep for aws-sdk|@aws-sdk|boto3|google-cloud|@google-cloud|firebase. If functional deps found → read cloud-sdk-migration.md, then ask_user: "Redirect to Azure Cloud Migrate" (set routeToSkill: "azure-cloud-migrate") · "Continue evaluation anyway" (finish readiness eval + SDK→Azure mapping, then STOP at Step 8 — no plan until the deps are swapped) · "Cancel".

Step 3: Per-Component Evaluation

Sub-step	Action	Reference
3.1	Build check	⛔ You MUST read build-check.md
3.2	Completeness check	⛔ You MUST read completeness-check.md
3.3	Deployability check	⛔ You MUST read deployability-check.md
3.3a	Component mapping (conditional)	Read component-mapping.md ONLY IF >1 project manifest found (monorepo)

Populate buildRequirements per component after evaluation. Verdict propagation, tier rules, and f1Viable aggregation are in readiness-gate.md and the individual check references.

Step 4: Write Artifacts + Readiness Gate

⛔ Verify context.json exists on disk. Read readiness-gate.md (verdicts, tiers, batch-then-approve, fast-track) then prereq-artifacts.md (write procedures, schemas).

Step 5: Present Findings

Per readiness-gate.md § Present Findings — show verdicts grouped by severity before proceeding.

Step 6: Remediation (conditional)

⛔ You MUST read remediation-protocol.md IF any ❌ FAIL verdict, 🔧 Recommended Fix, or ⚠️ WARN with fixPhase: "prereq" exists. Contains remediation loop, static verification, re-eval mandate, post-remediation artifact updates, and the build-validation consent gate. If all verdicts are ✅ PASS or ⚠️ WARN without fixPhase: "prereq", skip to Step 7.

Step 7: Write Final State

completedPhases already has "prereq" + currentPhase: null (from Step 4). Then:

⛔ Write lastScanCommit. Run git rev-parse HEAD and store the full 40-character SHA as context.json.repo.lastScanCommit. Required — staleness guard in Step 1 compares to HEAD on resume to detect changes.

Step 8: Route

⛔ Mandatory — do NOT skip this step.

Routing fields: All routing writes routeToSkill and routeReason to context.json.

Post-remediation context: If Step 6 ran, lead the routing prompt with: "Remediation complete — {N} issues fixed, your app is now {overallHealth}."

⛔ Evaluate rows top to bottom — first match wins.

#	Condition	Action
1	routeToSkill set (any entry)	ask_user: "Redirect to {routeToSkill}" / "Not now". ⛔ Pipeline stops — do NOT proceed to architecture planning.
2	cloudSdkFindings[] non-empty (user chose "Continue evaluation anyway")	Present the cloud-SDK → Azure swap mapping as 🔶 blockers, then ask_user with this exact prompt: "🔶 Cloud SDK migration required — these dependencies must be swapped before this app can deploy to Azure. (Redirect to azure-cloud-migrate / Stop — swap manually and re-run)" — Redirect sets routeToSkill: "azure-cloud-migrate", Stop halts. ⛔ Pipeline stops — do NOT proceed to architecture planning, and do NOT offer a "continue to prepare" option; the app can't deploy until the deps are swapped.
3	Orchestrator + no routeToSkill	Tell the user: "✅ Your app has been evaluated and is ready — let's plan your Azure deployment." Then invoke azure-app-onboard. ⛔ Do NOT stop, do NOT wait for user input, do NOT narrate internal handoffs. The user already consented to the full pipeline at scope triage.
4	Direct + ready/readyWithCaveats + no Azure infra	ask_user: "Deploy to Azure (full pipeline)" → invoke azure-app-onboard / "Not now"
5	Direct + ready/readyWithCaveats + existing Azure infra	ask_user: "Start fresh" → invoke azure-app-onboard / "Use existing infra" → invoke azure-prepare / "Not now"
6	Direct + blocked	Report blocker summary + "Fix and re-run."

Severity tiers (🛑🔶❌🔧⚠️✅) are defined in readiness-gate.md.

Outputs

Artifact	Location	Consumer
Session context	context.json → components[], repo{}, detectedInfra[], detectedServices[]	All downstream phases
Prereq output	prereq-output.json	prepare phase (via azure-app-onboard)
Readiness report	.copilot-azure/sessions/{uuid}/readiness-report.md	User (offline reference)